An OT Security Awareness Program for Operators and Maintenance Teams

How do you explain OT security to operators and the maintenance team? Shift-friendly, role-based content, scenarios from the production floor, a reporting channel and measurement.
Technical summary
Technology
OT security awareness, incident reporting, IEC 62443-2-1
Topic
A role-based security awareness program for production floor staff
Level
Beginner–intermediate
Prerequisites
  • Support from production, maintenance and OHS managers
  • The plant’s OT security rules (USB, remote access, passwords)
  • Access to the shift plan
In this article8 sections

Security training prepared for office workers often doesn’t land on the production floor. The operator may not have a corporate email, the maintenance technician spends most of the day at cabinets, and there’s no room for a 45-minute e-learning module during shift handover. Yet the first person to notice unexpected behavior on the HMI, an unknown device plugged into a cabinet or a service engineer arriving unannounced is the staff on the floor. Below we explain how to set up an OT security awareness program suited to operators and the maintenance team.

Why awareness is different for floor staff

On the production floor, the goal of awareness isn’t to make staff cybersecurity experts. The goal is three behaviors: noticing, not intervening on their own and reporting quickly through the right channel. These behaviors are familiar from OHS culture. If the program is built on top of them, acceptance comes more easily.

Where it differs from office training:

  • Risk source: In the office, email and the web are the main risk sources; on the floor, removable media, remote access, vendor visits and shared stations come to the fore.
  • Consequence: In the office, data loss and fraud are discussed; on the floor, stoppages, defective products and safety risk.
  • Access: Floor staff may not have an individual computer or email account; the training and announcement channel must be different.
  • Time: The shift schedule doesn’t allow long sessions; content should be short and repeated.

For phishing and fake invoice scenarios aimed at office users, the reducing phishing risk in enterprise email and BEC and fake invoice fraud articles are more suitable; here we focus only on floor staff.

Role-based content: operator, maintenance, engineer

Giving everyone the same content means unnecessary detail for the operator and insufficient depth for the engineer. The table below is an example of a role-based content distribution.

Role Focus topics Expected behavior
Operator Signs of anomalies on the HMI, the USB ban, shared account use Notice, keep the process safe, report
Maintenance technician The removable media procedure, foreign devices inside cabinets, escorting vendors Follow the procedure, report a foreign device without removing it
Automation engineer EWS security, PLC passwords, program backups, change records Make changes with a record, report unauthorized changes
Shift supervisor Reporting flow, first decision, escalation, manual operation Assess the report, call the right person
Vendor / contractor Plant rules, remote access and media policy Comply with the rules in writing

Shift supervisors are in a separate position. They’re the ones who first assess a report from the floor and first face the question “should we stop the line?” Preparing a short decision card for this role ties the incident response plan to the floor; the plan’s general structure is described in the OT incident response plan article.

Floor-specific scenarios

Build the content on concrete situations staff could encounter in their own plant. Instead of general descriptions of cyber threats, scenarios like these work:

  1. An unknown USB stick: At shift change, an ownerless USB stick is found in the control room. The right behavior: don’t plug it in, ask who left it, hand it to the security owner.
  2. A cursor moving by itself: The cursor moves or windows open on the HMI screen. The right behavior: watch the process without touching the screen, report to the shift supervisor and, if needed, bring the process to a safe state according to the procedure.
  3. An unannounced service visit: Someone introducing themselves as the machine builder’s service engineer wants to connect a laptop to the cabinet without a work order. The right behavior: ask for the work order and approval, don’t allow it without an escort.
  4. A request by phone: “I’m calling from IT, open the program on the HMI so I can connect remotely.” The right behavior: verify by calling back; don’t act on a request coming from outside the known channel.
  5. An unexplained value change: A setpoint appears to have changed even though nobody touched it. The right behavior: record the change and report it; don’t carry on saying “someone must have changed it.”

The common reaction is in the fifth scenario. The value has changed, everyone assumes the previous person changed it, nobody asks. Asking is part of the job. The technical and procedural background of the removable media scenario is in the USB and removable media control in production environments article; the rules taught in training should be exactly the same as that procedure.

The anomaly reporting channel and culture

The real output of an awareness program is reports. When designing the channel, keep these principles in mind:

  • A single, easy channel: An internal phone number or reporting directly to the shift supervisor. An email address or portal floor staff can’t access doesn’t count as a channel.
  • Clear criteria: Define with examples what should be reported: an unknown device, unexpected screen behavior, an unannounced visit, a lost laptop, an unexplained parameter change.
  • A no-blame approach: Staff who accidentally plug a USB stick into an HMI or station reporting it is far more valuable than them hiding it. Announce clearly that no disciplinary process will be started because of a report.
  • Feedback: Give a short outcome for every report. If staff don’t see their report make a difference, they stop reporting.
  • Records: The shift supervisor records reports with a simple form; the records reach the OT security owner and are passed to the SOC when needed.

Tying the reporting flow to the near-miss reporting system in OHS is the most practical way to take advantage of an existing habit. Don’t set up a new system. Add to the one you have.

Training formats that fit the shift schedule

Short, frequently repeated formats work better on the floor than long classroom sessions. The formats can be used together so they complement each other:

Format Duration / frequency Suitable content
Short talk at the start of a shift A few minutes, periodic One scenario, one rule
Onboarding training Once, when starting the job Basic rules, the reporting channel
Floor exercise A few times a year Reporting and first response
Posters and a control room card Continuous The reporting number, the USB rule
Role-based workshop Once a year Depth for engineers and supervisors

A one-page card next to the HMI in the control room helps people remember during an incident what was taught in training: whom to call, how to keep the process safe, what not to touch. Adding a few cybersecurity rules to the safety briefing given to vendors and contractors at the plant entrance is also an effective, low-cost step.

Common mistakes

  • Copying office content to the floor: A presentation built on password complexity and email attachments doesn’t tell the operator at the HMI what to do.
  • One-off training: A session held once a year quickly loses its effect with shift changes and new hires.
  • Fear-based messaging: Training that opens with disaster scenarios creates a “there’s nothing I can do” perception among staff. Focus on concrete, actionable behavior.
  • Leaving out managers and contractors: Those who bend the rules most often are usually supervisors under pressure during an emergency breakdown and contractors temporarily at the plant.
  • Not testing the reporting channel: Verify with an exercise that the internal number on the poster is answered on the night shift. A number nobody answers isn’t a number.

Measuring effectiveness

Whether the program works can’t be understood from the attendance list. Use indicators that measure behavior:

  • Number and type of reports: An increase in reports after the program starts is usually a positive sign; it doesn’t mean real incidents have increased.
  • Reporting time: The time between noticing an anomaly and the report arriving.
  • Exercise results: Whether staff behaved correctly in a planned scenario (for example a marked USB stick left in the control room or an unescorted “visitor”). Plan such exercises in advance with management, OHS and, if needed, employee representatives; use the results to evaluate the process, not individuals.
  • Technical indicators: The trend in records such as USB attempts blocked in device control logs and unapproved remote access attempts.
  • Short knowledge checks: A two- or three-question oral check after the shift talk.

Interpret indicators as trends more than absolute values, and update the content at the end of each period. An incident or near miss on the floor can become the next period’s scenario.

To design the organization-wide awareness and phishing simulation program so that it also covers floor staff, see the cybersecurity training and phishing simulation service, and for aligning the program with technical controls, the OT/ICS and industrial cybersecurity page. IEC 62443-2-1 treats staff training as a requirement in the asset owner’s security program; for general OT-specific guidance, CISA’s industrial control systems page is a reference point.

Frequently asked questions

Does it make sense to run phishing simulations for operators?

Yes, if operators have corporate email accounts and shared computers they use to access them. However, the risks more often seen on the floor are removable media, unexpected remote connections and fake service visits. Design the simulation program to include these floor scenarios as well.

Can awareness training be added to OHS training?

It can, and it’s often the most efficient way; OHS training is already planned around the shift schedule and accepted on the floor. The cybersecurity module should be short, floor-specific and consistent with OHS messages: when you notice an anomaly, stop, report, don’t intervene on your own.

How is the program’s success measured?

The participation rate alone says nothing. Track together, and look at the trend of, the number and quality of reports, the time between a report and the response, staff showing the right behavior in floor exercises, and indicators from technical records such as removable media rule violations.

How should staff who report a false alarm be treated?

Always meet the report with thanks and briefly tell the person the outcome. Staff criticized for a false alarm avoid reporting the next real incident. If unnecessary reports multiply, the solution is to clarify the reporting criteria and examples.

Support

Contact us for support or a discovery session on this topic.

Contact form
[email protected]

Eretek Cybersecurity

Firewall, VPN, endpoint security and threat prevention. We reduce the attack surface and measure and report the risks.

Knowledge Center

Other articles