Network and Infrastructure Security

Firewall Installation and Rule Management

We review firewall rules through traffic needs, application dependencies and management access. We identify unused or overly broad permissions and plan changes with test and rollback steps. Test firewall access policies together with the network zones and transit paths in the enterprise VLAN setup and network segmentation plan.

NAT

Vendor-neutralFortiGatePalo AltoCiscoCheck PointSophosZone-based policy

Need and approach

What does this service cover?

We address zone, NAT, IPS, application control and VPN settings together with the rule base. The work can be carried out on platforms such as Fortinet FortiGate, Palo Alto Networks, Cisco, Check Point, Sophos, WatchGuard and pfSense/OPNsense; implementation steps are prepared for the specific device.

01

Do we need to replace our current firewall?

Not always. Configuration, support lifetime, licensing and capacity are assessed first. If capacity isn’t enough or the device is out of vendor support, we recommend a refresh.

02

Will there be downtime during rule cleanup?

The decision to remove or narrow a rule is evaluated together with log and hit counter data. A low counter doesn’t mean a rule is unnecessary; the observation period should also cover periodic workloads such as month-end or year-end. Changes are implemented in a maintenance window with a rollback step. A rule with uncertain impact is first disabled and monitored.

03

Is SSL inspection (deep inspection) mandatory?

It isn’t mandatory. It’s needed to inspect the content of encrypted traffic; certificate distribution, application compatibility, privacy requirements and exception lists (e.g. banking, healthcare) are planned together. Legal compliance should be assessed separately.

04

Which firewall brands do you work with?

We work on widely used platforms such as Fortinet FortiGate, Palo Alto Networks, Cisco (ASA / Firepower), Check Point, Sophos, WatchGuard, SonicWall and pfSense / OPNsense. This list shows the platforms we work with; it does not imply vendor partnership. The approach to rule analysis, zone design and security profiles is the same; implementation steps are prepared for the platform in use.

Implementation approach

Change based on evidence, keep the rollback ready

01 / ANALYSIS

Inventory and traffic analysis

The configuration dump, rule hit counts, logs and application dependencies are collected.

02 / PLAN

Target policy design

The zone model, rule matrix, security profiles and change list are prepared.

03 / EXECUTION

Controlled implementation

Changes are implemented step by step in a maintenance window, with a rollback plan.

04 / HANDOVER

Validation and handover

Application tests, log checks, up-to-date documentation and maintenance recommendations are delivered.

Cyber Security

Let’s assess Firewall Installation and Rule Management together

Let’s talk about your device and the state of your rule base; let’s identify the first gaps to close.

We deliver firewall projects across Türkiye; device installation and cutover are done on site, while rule reviews and monitoring continue over secure remote access. Our service areas.